# Raw material to finished goods at Sterlite Copper

> Every pallet of blisters, ingots and imported cathodes tagged with RFID and followed from the weighbridge to the finished product, with the goods receipt and every transfer posting to SAP and nobody keying anything in.

- **Page** - https://iotready.com/case-studies/sterlite-copper-rm-traceability
- **Client** - Sterlite Copper
- **Published** - 2024-11-19
- **Industry** - [Heavy Manufacturing](https://iotready.com/industries/heavy-manufacturing.md)
- **Solution** - [Warehouse Management](https://iotready.com/solutions/warehouse-management.md)

## Results

- **0** Manual entries between the yard and SAP
- **Real time** Pallet location and stock in SAP

## The problem

Sterlite Copper melts blisters, ingots and imported cathodes, refines the
result and draws it into rod. A truck brings in about 25 tonnes. Blisters come
strapped to pallets in packs of seven, roughly 2.6 tonnes a pallet. Ingots
come on pallets too, or in bags of up to 3 tonnes.

The truck was weighed in and out and the material weight checked against the
advance shipping notice. Then a surveyor stuck a handwritten label on each
pallet.

After that, the paper took over. A forklift picked the pallets for a furnace,
and security wrote down which ones. At the furnace, an operator wrote down what
was charged. At the end of the day someone typed both lists into SAP, and the
logistics team compared picked against charged by eye.

So SAP was always a day behind the yard, and the question that mattered was
the hardest to answer. Which supplier's cathode, which grade, which batch
went into this charge?

## What we track

The pallet is the unit. Each pallet, bag or bundle carries an RFID tag on its
side, and that tag is the only thing the system needs to know about it. The
SKU, grade, batch and weight sit in the record behind the tag, and imported
cathodes also carry their supplier.

![A pallet's path: truck and weighbridge, a pallet scale with an RFID reader where the goods receipt is created, the raw material yard, the furnace yards, then the refinery. Roadside RFID readers sit on the transfers between the yard, the furnace yards and the refinery. Both post to SAP.](https://iotready.com/images/insights/sterlite-pallet-flow.svg)

_Two kinds of reader, one record, posted to SAP._

## End to end

**Receiving** - Weighed and read together

1. Pallet goes on the scale
2. Weighment and RFID reader capture the weight and the tag at once
3. Goods receipt posts to SAP

**The yard** - Tracked without being touched

1. Roadside RFID readers hear the pallets as the forklift drives past
2. Transfers post to SAP by themselves
3. Stock by location is always current

**The furnace** - Consumption against procurement

1. Pallets weighed before charging
2. Consumption traces back to the goods receipt

## Receiving

The pallet goes on the scale and the weight and the tag are captured together.
That's the goods receipt. One thing happened, once, and the record says so.

The weight is still checked against the advance shipping notice, and a
discrepancy still needs approval. What changed is that the pallet is already
identified by the time anyone asks.

## Transfers

Fixed RFID readers sit by the road. A forklift drives past with pallets, and
the readers hear every tag on it. Several antennas cover the lane, so it doesn't
matter which way a tag faces.

That's the transfer. Nobody stops to scan, and security no longer writes
anything down.

## SAP

Everything lands in SAP ECC 6.0 through PI, as the document SAP expects: the
goods receipt at the scale and the stock transfers from the readers. There is no
end-of-day batch of typing, because there's no typing.

## Finished goods

Finished goods are tagged too. The tag on a finished product links back to the
charge it came from, and the charge links back to the goods receipts behind it.
So a finished product can be traced to the pallets, the batches and, for
imported cathodes, the supplier it started with, without anyone joining
spreadsheets.

## Why it fit

Pallets were already the unit on the floor. Nothing had to be re-packed to
suit the system, and the readers sit where the forklifts already drive.
Nobody on the floor has a new job. They have one fewer.

Vedanta Aluminium's stores use the same platform, with handhelds in place of
fixed readers: [Stores inventory at Vedanta Aluminium](https://iotready.com/case-studies/vedanta-smelter-inventory.md).

## What was deployed

- [Weighing Scale Data Logger](https://iotready.com/hardware/weighing-scale.md): Turns an existing RS232 scale into a connected station - weight and a scan together, shown on a jumbo display and published over Bluetooth LE.
- [RFID Reader](https://iotready.com/hardware/rfid-fixed-gate.md): One UHF platform, ordered as Long Range for dock doors and gates or Short Range for point-of-sale and desks - the same read event either way.
