# The RFID family tree

> LF, HF, UHF and active RFID share a name and not much else. Where the near field ends, why that sets the range, and which band a job needs.

- **Page** - https://iotready.com/insights/the-family-tree
- **Author** - Tej Pochiraju
- **Published** - 2026-11-05
- **Topics** - Technology, Inventory Management

Your dog has an RFID chip in its neck. Your pallet has an RFID label on its side. The reader for one can't read the other, and no firmware update will fix that.

They share a name and the same basic parts, a chip and an antenna. Underneath they run on different physics. What decides which physics you get is the length of the wave.

Film: [The RFID family tree: LF, HF, UHF and active tags, each wavelength drawn against a pallet](/media/rfid-03-the-family-tree.mp4)

_Low and high frequency tags sit inside the reader's magnetic field. UHF tags catch a radio wave. Active tags carry a battery and transmit on their own._

## One wave, three lengths

A dog's chip talks at 134.2 kHz. That's the frequency ISO 11784 and 11785 fix for animal tags, and at that frequency one wave is 2.2 kilometres long. Access fobs and car immobiliser keys sit nearby at 125 kHz, where it's 2.4.

A contactless bank card talks at 13.56 MHz. One wave is 22 metres.

A UHF label in India talks between 865 and 868 MHz. One wave is 35 centimetres, three and a half to a pallet.

## Where the near field ends

Close to an antenna the field hasn't turned into a radio wave yet. It's mostly magnetic, and it falls off fast: with the cube of the distance. Twice as far gets you an eighth of the field and a sixty-fourth of the power a tag can pull out of it. Further out, the field settles into a wave that carries its energy away, and that falls off much more gently. The usual line between the two is the wavelength divided by 2π.

For 125 kHz that line is 382 metres from the reader. For 13.56 MHz it's 3.5 metres. For 866 MHz it's 5.5 centimetres.

So an LF or HF tag is always in the near field. The reader's coil and the tag's coil behave like the two halves of a transformer, and the tag draws its power through that coupling.

Which is why the range is short. It isn't the boundary that stops it. Long before 382 metres, long before 3.5 metres even, the field is too weak to run a chip. A glass capsule in a dog reads at somewhere between 5 and 15 centimetres. A bank card is specified for about 10. Bigger coils buy a little more, and ISO 15693 readers with a large antenna get to about a metre. Turning up the power buys almost nothing, because of that cube.

A UHF tag a metre from the reader is eighteen times past the line. It's catching a radio wave, and the power in a radio wave falls with the square of the distance. Twice as far, a quarter of the power. That's where metres come from. With a 1 W reader and a 6 dBi antenna (35 dBm radiated, inside India's 2 W ERP limit) and an NXP UCODE 9 tag, the [range calculator](https://iotready.com/tools/rfid-range-calculator.md) gives about 22 metres in free space and about 11 with 6 dB held back for the real world.

## And water?

Water soaks up radio at UHF. It barely notices a low-frequency magnetic field.

That's the whole reason the dog's chip works through the dog, and why a UHF label on a bottle of shampoo needs a tag built for it. HF sits in between. It's happy on or near a liquid, which is part of why it ended up in cards and phones that live in sweaty hands.

Metal is a different problem, and it gets its own issue.

## The ones with a battery

Active tags and BLE beacons don't wait for a reader to power them. They carry a battery and transmit on their own, at 433 MHz under ISO 18000-7 or at 2.4 GHz. Vendors quote up to about 100 metres in open ground for 433 MHz tags. A beacon announces its ID on a timer and any phone in range hears it.

You pay for the battery and the box. A Minew beacon lists at about ₹930 each for a hundred in India. A 433 MHz active tag lists at $17 to $30. A paper UHF label is ₹5 to ₹10. So one beacon costs about a hundred labels, and a few years in, somebody has to go round changing batteries.

## So which one?

Need metres from a tag with no battery? UHF. Nothing else in the family does it.

Need to read through an animal, or a sack of something wet? LF.

Need a customer's phone to read it? HF, which is to say NFC. An ordinary phone can't read UHF.

Need to find a forklift somewhere in a ten-acre yard? Give it a battery.

Most projects that start with "we want RFID for our stock" end up at UHF, which is why the rest of this series is about UHF. The other bands are for when one of those questions comes up and UHF has no answer.

The [band explorer](https://iotready.com/tools/band-explorer) puts all five side by side. Pick one and it draws the wave against a hand, a carton and a pallet, marks where the near field ends, and gives the typical range, the tag cost and the standards. Six questions at the bottom rule bands out. The tag costs there are the least certain numbers on the page, so treat them as a starting point for a quote.

If someone quotes you RFID and doesn't say which band, ask. A 13.56 MHz system won't read a pallet at a dock door however much you spend on the reader.
