QR
QR & Barcode Scanner
A fixed-mount, IP68 scanner that reads every common 1D and 2D code over one RS232 cable, built for washdown lines a handheld will not survive.
At a glance

IP68
Water & dust proof
−10 to 60°C
Operating range
23
1D & 2D symbologies
115200baud
Default RS232 rate
Overview
Built for places a handheld consumer scanner will not survive. The optics sit behind an IP68 enclosure in a powder-coated metal body, so the unit can be hosed down, splashed or submerged with no cabinet around it - a food-processing line, a weighbridge, a dispatch gate.
It reads all common 1D and 2D symbologies over a single DB9 RS232 connection, with optional power on Pin 9 so one cable carries data and supply to the scan point. Every setting, baud rate, symbology set and factory reset included, is configured by scanning a printed code. There is no driver to install.
Specifications
Parameters
| Interface | RS232, DB9 connector |
|---|---|
| Baud rate | 1200 to 115200, configurable (115200 default) |
| Power | Optional supply on Pin 9 of DB9 - one cable for data and power |
| Enclosure | IP68, water and dust proof |
| Body | Powder-coated metal, impact resistant |
| Operating temperature | −10 °C to +60 °C |
| Illumination | White LED, with circular red aiming light |
| 1D symbologies | 17 linear codes, including Code 128, EAN/UPC and GS1 DataBar |
| 2D symbologies | QR Code, Micro QR, Data Matrix, PDF417, Micro PDF417, Aztec |
| Configuration | By scanning printed configuration barcodes - no driver, no laptop |
Used by
Next step
Specify a qr & barcode scanner for your site.
Tell us the read distance, the throughput and what it has to talk to. We will confirm the configuration, or point you at a simpler device.
or write to sales@iotready.com