Free tools
Tools
Free calculators, planners and simulators for RFID, barcodes, labels and the systems behind them.
RFID planning
Tool
Barcode or RFID?
Describe the count you do and get a straight answer: which technology pays for itself here, why, and how many hours each one costs you a month.
Tool
RFID pilot planner
One read point, four weeks, and pass marks you write down before the first read. Put in your traffic and it works out how many misses you can afford, then prints the plan on one page.
Tool
RFID ROI calculator
Put your own prices in and see when RFID pays back. Then the sum a vendor hopes you won't do: a 99% read rate on a 50-case pallet reads only 60% of pallets complete.
Tool
RFID range calculator
How far will a passive UHF tag read? Pick a tag chip and a reader, and see the range in free space and the range you should plan for.
Tool
WIP read-point planner
List the stations a job goes through. See where the readers go, what event each one writes into the order history, and how many tags you need.
Tool
Ship from, ship to
Every country opens a different slice of the UHF band at a different power. Pick where a tagged carton leaves and where it lands, and see what the tag does at each end.
RFID explained
Tool
The RFID family
RFID is five technologies that share a name. Pick a band and see its wavelength to scale, where its near field ends, how far it reads, what a tag costs and what it is good for.
Tool
Antenna explorer
Gain narrows the beam. Within the legal power limit it barely lengthens it. Polarisation decides whether a turned tag reads at all. Pick an antenna, turn the tag, and see what each one does to the range.
Tool
Tag memory
A passive tag is an antenna, a chip and a few hundred bits of memory split four ways. Pick a chip and rewrite its EPC. Then try to change the TID, lock a bank, and see what a stranger's reader can still do.
Tool
EPC encoder and decoder
Paste the 24 hex characters a reader shows and see the GTIN, serial and filter inside. Or type a GTIN or SSCC and get the hex a printer should write.
Tool
Surface test
The same tag on cardboard, glass, a bottle of water and a steel rack. See what each surface does to the read, and what a spacer or an on-metal tag gets back.
Tool
Wake the tag
A passive tag has no battery. Drag it away from the reader and watch which gives up first: the power reaching the chip, or the reply reaching the reader.
Tool
Stranger with a handheld
Five tags on a rack, each protected a different way. Pick what the stranger is trying to do and see what they get, what your back end can still catch, and what the reader itself needs.
RFID simulators
Tool
Anti-collision simulator
Five hundred tags, one reader. Watch a Gen2 inventory round by round: pick Q and a session, then see which slots read, which collide and how long the lot takes.
Tool
Dock door simulator
Drive a tagged pallet past two dock doors and watch what each reader hears, which reads the rules keep, and what the system concludes: which door, which direction, or nothing.
Tool
Read filter
A pallet goes through a dock door and the reader reports a few thousand times. Move the filter, dedup and quiet-timeout settings and watch what reaches the ERP.
Tool
Voucher preview
Paste the EPCs from a dispatch and see the delivery note they would post in TallyPrime, Zoho Inventory or SAP Business One. Or the exceptions that stop it.
Operations
Tool
Cycle-count calculator
Put in your racks and how often you count them. Get the minutes a rack and the hours a month, by barcode and by an RFID handheld, with the exceptions checked.
Tool
Returnable asset calculator
Put in your fleet, your loss rate and what a crate costs. See what the ones that never come back cost you a year, and how long a gate reader and a few thousand tags take to pay for themselves.
Tool
5W2H requirements builder
Answer 36 questions about who, what, where, when, why, how and how much. Get a shortlist of technologies, a plan and a brief you can hand to a vendor, saved behind a link you can share.
Labels and code
Tool
QR code generator
Make a QR code without an account. Plain codes never leave your browser.
Tool
Label designer
Draw a label, pick your printer, and get the code it understands. ZPL, TSPL or PGL, all at 203 dpi. Free, and nothing to install.
Tool
Starlark editor
Edit Starlark as code or as a graph, and run it in the browser. The .star file is the only source of truth. Free, and nothing to install.
Next step
Tell us what you are trying to trace.
Describe the flow: what arrives, what happens to it and what leaves. We will tell you what it takes to capture it.
or write to [email protected]