Free tool
RFID ROI and read-rate calculator
Put your own prices in and see when RFID pays back. Then the sum a vendor hopes you won't do: a 99% read rate on a 50-case pallet reads only 60% of pallets complete.
Work out a payback
Payback
-
Rough figures. Every number on the left is a starting point for yours, and none of them is a quote.
- Paid once
- Tags, every year
- Software, every year
- Comes back, every year
- Net, every year
The read-rate sum
A vendor's "99%" is per tag. A pallet only counts if every case on it reads.
Pallets read complete
-
How it works
What it works out
Two sums, and a third that most quotes leave out.
The money. One-off kit (readers at the doors, handhelds, printer-encoders, an edge box) plus integration, which is the line people forget. Then tags and software every year. Against that, four places the money comes back: cycle counts that take a sweep instead of a shift, shrinkage you can now see, chargebacks you stop paying for pallets that went out wrong, and hours saved at receiving and dispatch. Payback is the one-off spend divided by the yearly net.
The lever. The calculator names the biggest line over five years. On the defaults it’s tags, by a distance, which is why the tag price per item matters more than the reader price. A ₹6 label on a ₹200 carton is 3%. A ₹60 on-metal tag on a ₹50,000 asset is nothing.
The read-rate sum. A vendor’s “99%” is a per-tag figure. A pallet only counts as read if every case on it reads, and 0.99 to the fiftieth power is 0.60. For 95% of pallets to read complete you need 99.9% per tag, which is a different conversation. Ask for that number, measured on your stock, through your doors.
What it assumes
The defaults are rough Indian market figures for 2026, for a mid-sized warehouse with two dock doors tagging cartons. They’re starting points for yours, not quotes, and none of them is our pricing. Each field says where its number came from. Dollar prices are US reseller listings at ₹94.4 to the dollar, and Indian prices will differ with duty, GST and who you buy from.
What has a source: tags at ₹4 to ₹10 (Indian marketplace listings for paper UHF labels and wet inlays, ₹60 to ₹90 for on-metal labels), a four-port Impinj R700 at $1,499, circularly polarised antennas at $170 to $290, Zebra’s RFD40 reader sled at $1,000 to $2,000 (it needs a phone or handheld computer as its host, and the price leaves that out), the ZD621R printer-encoder at $2,200 to $2,600, and ₹150 an hour for labour, the same figure as the barcode-or-RFID demo. The 90% cut in count time is below what Auburn University’s RFID Lab and GS1 US measured in Project Zipper, which was 96%.
What doesn’t: integration, software, the edge box, how many doors and handhelds you need, hours per count, chargebacks, and the recovery rates. The shrinkage default of 1.5% is an assumption. The NRF’s figure is 1.6% of retail sales in 2022, in the US, and that’s sales, not warehouse stock. Integration is the largest guess in the stack, so replace it with a quote first.
Nothing here is discounted to present value, and the savings are flat from year one, which is generous: a real site ramps over the first quarter.
The pallet drawing marks the expected number of misses for the rate you set, rounded. Real misses cluster: the cases in the middle of a shrink-wrapped pallet, the ones against metal, the ones a forklift tine is covering. That’s what the pilot is for.
Running a pilot that doesn’t lie
Real stock, not sample cartons. Real doors, with the forklifts that use them. A month, not an afternoon. Count every miss against the ERP’s own record of what left, and ask for the per-tag rate as a number you can check, not an adjective.
For how range and tag placement set that read rate in the first place, see Wake the tag and the range calculator.