Hardware
Printer debugging
Checks for an Argox CP2140 that is not printing, and how to reset one to factory defaults.
Printer setup and troubleshooting
-
Please make sure the printer model connected to the device is Argox CP2140.
-
Check the USB connection to the printer and try reinserting the USB cable.
-
Ensure the printer is powered by a 24v power supply.
-
Check the green LED while the print is triggered.
-
Ensure the green LED is continuously on when no prints are triggered.
The Argox printer manual is available from support@iotready.com.
Resetting printer to factory defaults
- Turn on the printer and wait until both the “Ready” indicator and the “Power” indicator stay solid green.
- Press the “FEED” button for 4 seconds, and the “Ready” and “Power” indicators will go off in order.
- Once the “Power” indicator becomes lit again, release the “FEED” button.
- The “Ready” indicator will also become lit. At this moment, the printer has resumed its factory default settings.
Note: The printer will delete any print tasks that were received but not yet printed.